VM Snapper
How to connect phone to computer:
1. GET DATA CABLE: You need a data cable to send or receive data from the phone. You can get a generic one off eBay for $7-$10. Just do a title search for "Audiovox 8910 cable" The 8910 (also known from Virgin as The Flasher) uses the same cable.
2. DOWNLOAD DRIVERS: Go to: http://www.curitel.com/UploadDATA/mf_down/TX115CPCSync.zip to download the driver for the Virgin Mobile Snapper. Once the download is complete, unzip and install.
3. DOWNLOAD BITPIM: Go to http://www.bitpim.org/ and download the latest version of BitPim. Install BitPim when the download is complete. BitPim is the program that lets you upload music and pictures to your phone and edit your phones file system.
4. CONFIGURE BITPIM: Open BitPim and go to Edit>Settings. The phone type is "Other CDMA phone" and the Com Port is whatever USB port you plug your phone into. Mine is "COM4" but yours can be anything from "Com1" to "COM9" or higher.
5. CONNECT PHONE TO PC: Turn your phone on and connect the phone to your computer. The computer will have to install the driver and then it will say that the installation was a success.
Notice: We cannot be responsible or assume any liability for the contents of any third party web sites accessed through links from or to our site. These links do not imply our endorsement or affiliation, are for convenience only and must be used at your sole risk. We do not host any of the files listed on the page. They are only links to other sources.
