Fusion Cutter
    Used for mining, tunneling, excavating and hollowing planetoids. The cutter can excavate up to a 5m diameter tunnel. It may be focused to cut a tunnel as small as 2m in diameter. Exceptionaly dense or high heat capacity materials may reduce cutting capacity to 80%. Fine work such as small compartments, large planters, etc... may be accomplished at a 50% reduction in cutting capacity. The operator must wear a heat/radiation protection in order to operate the unit.

TL             Vol              Weight                     Price            capacity
10              9 kl             15 tons                  250 kCr          20 kl/hr
12              7 kl               9 tons                  180 kCr          35 kl/hr
14              3 kl               5 tons                  100 kCr          50 kl/hr
16              2 kl               3 tons                   100 kCr         65 kl/hr

Fusion Tunneler
    A smaller version of the Fusion Cutter appearing at TL 13, the Tunneler is able to cut tunnels from 2.5m to as small as 0.5m in diameter. It may be used for fine work such as doorways, furniture etc... at a 50% reduction in capacity. Exceptionally dense or high heat capacity materials may reduce cutting capaccity to 80%. The operator must wear heat/radiation protection to operate the unit.

TL             Vol              Weight                     Price            capacity
13              4 kl               6 tons                  350 kCr            7 kl/hr
14              3 kl               4 tons                  250 kCr          11 kl/hr
15              1.5 kl            2.5 tons               140 kCr          15 kl/hr
16              0.5 kl            1 tons                  100 kCr          20 kl/hr

To safely operate a Fusion cutting device for a 4 hr shift
Routine; Skill, Avg. Int/Edu; fateful, hazardous

To perform fine work with a Fusion cutting device for a 4 hr shift
Routine; Skill; fateful, hazardous