BrickTopia Bullet Train
|
Here, one sees the BrickTopia Bullet Train Speeding through the BrickTopian citizens were excited when the new high speed train (#4511) became available from LEGO (see this link for reference). However, the stock set was left a lot to be desired, so designers went to work on the following changes: - An extra brick height was added to all the cars so that citizens could walk upright through them. - An extra car was added to the end of the train to allow greater passenger carrying capabilities. - Engine capabilities were increased, with a fiber optic assembly for impressive light shows on the side of the locomotive. - Doors were added to all cars and the engine. - Various additional details were added. |
|
|
|
|
|
|
|
The picture below shows the engine. The hatch in the middle opens upwards for access to the control cabin. On the right side of the image, one can see 4 black holes under a grating. These are the fiber-optic ports that display an impressive light-show as the train is running.
The first class car is seen in the next image:
Click Here for Interior Pictures and Descriptions