WUXGA 15.4 1920x1200 WUXGA LCD & Controller Group Buy
HOME
KIT CONTENTS
SPECIFICATIONS
BUYING INFO
» RESULTS «
» TESTIMONIALS «
» DOCUMENTATION «
TIMELINE
FAQ
JOIN GROUP BUY
LINKS
CONTACT ME





Specifications


.:  LCD Panel

- Manufacturer:          Sharp
- Model:                      LQ154M1LW02
- Response Time:        25ms
- Contrast Ratio:        400:1
- Color:                       256k (16.2mil w/ dithering)
- Screen Size Ratio:    16:10
- Resolution:               1920x1200
- Dimensions:              Here


.:  Controller Board

- Features
»  Specially programmed BIOS to support Sharp 15.4" WUXGA Panel
»  Zoom and shrinking scaling
»  Programmable gamma correction (CLUT)
»  Real Color controls provides RGB compliance
»  PWM back light intensity control
»  Low EMI and power saving features
»  Infrared inputs supporting various remote controls
»  32-bit frame store DDR memory for high-speed image capture and processing
»  Horizontal and Vertical flip of display image
»  Picture in Picture, Graphics on Video, Video on Graphics, split screen
»  High-Quality Video Processing
»  High-performance adaptive 4H comb filter for video processing
»  Motion Adaptive De-Interlacing (MADI) on a per-pixel basis
»  Motion Adaptive Noise Reduction
»  Inverse 3:2/2:2 pull down for Film Mode detection
»  Low Angle Diagonal Interpolation (LADI)
»  Each Input has its own seperate settings saved in the controllers EEPROM. Therefore, the following settings can be different for each input: Brightness, Contrast, Hue , Saturation, Scaling Type, MADI level, noise level and color temperature.


- DVI-D Input
»  Single-Link Digital DVI Input
»  Up to 1600x1200@ 60Hz (UXGA) and 1920x1200@ 60Hz (WUXGA) reduced blanking
»  The DVI port supports both graphics and video signals.


- VGA Input
»  D-Sub 15pin
»  Supports Sync-on-Green (1080i,720p,480p,480i through Component-to-VGA cable)
»  Supported Graphic Inputs:
»  VGA port supports both PC graphics signals and 1080i/720p video signals.
»  OSD adjustments: Auto-Adjust, Phase, Clock, Vertical/Horizontal Position


- S-video & Composite
»  NTSC/PAL/SECAM inputs
»  Adaptive Deinterlacing, Noise Reduction, Angle Filtering, Film Mode Detect, Sharpness adjustments
»  High-performance adaptive 4H comb filter for video processing


- Dual Display
»  Picture in Picture & Picture by Picture (Split screen) supporting Graphics on Video, Video on Graphics
»  Does NOT support both Composite & S-Video at once
»  PiP/PbP Quick Swap
»  3 PiP Sizes (Small,Medium,Large)
»  Movable PiP Window, place it anywhere on the screen


- Scaling
»  4 Scaling Options: 1:1, Fill, Aspect, Panoramic
»  Ability to Zoom in on a portion of your video/graphic input
»  High-quality scaling capability from low-resolution to WUXGA resolution
»  Moire cancellation
»  Non-linear scaling for aspect ratio conversion of video


- On Screen Display
»  Ability to reset to factory default settings
»  Control all functions via the included OSD Board or Remote Control
»  OSD Settings: Vertical/Horizontal Position, Transparency, Timeout, OSDZoom (View Here)
»  Display Settings: Brightness, Contrast, Hue, Saturation, Flesh Tone, Internal Brightness (View Here)
»  Image Settings: Scaling, Auto-Adjust, Phase, Clock (View Here)
»  Video Image Settings: Adaptive Deinterlacing, Noise Reduction, Angle Filtering, Film Mode Detect, Sharpness (View Here)
»  Position Settings Zoom, Zoom Horizontal, Zoom Vertical, Vertical, Horizontal (View Here)
»  Color Settings: SRGB, Gamma Correction, Color Temperature(Red,Green,Blue) (View Here)
»  PiP Settings: PiP Mode, PiP Size, Vertical, Horizontal (View Here)


- Real Color Technology
»  Digital brightness and contrast controls
»  Color controls including hue and saturation controls
»  Flesh-tone adjustment
»  sRGB compliance allows end-users to experience the same colors as viewed on CRTs and other displays




000767