Miscellaneous Supplies
Most item on this page are easy to ship.

PC 2 GUN MAGNETIC REST


PC 2 GUN MAGNETIC REST


Item #: PC - GR - 2



Your Price:  $4.50 / EACH

 No need to lean your gun on the side of your truck or car, stick them in the rack.  The magnetic strip will not mar the paint and you don't have to worry about a gun hitting the dirt.  Remove from the fender when you are done.


PC 3 GUN MAGNETIC REST


PC 3 GUN MAGNETIC REST


Item #: PC-GR - 3



Your Price:  $4.99 / EACH



The PC Gun Rest is manufactured of durable molded plastic with a magnetic strip on the backside for attaching to a metal cabinet or your vehicle out in the field. PC Gun Rests are available to hold two, three, or four guns.

PC 4 GUN MAGNETIC REST


4 gun rest


Item #: PC-GR-4


Your Price:  $4.99 / EACH
COLORS:

Red

Green

Blue

Black


PC 4 GUN MAGNETIC REST


PC 4 GUN MAGNETIC REST High Vis Green


Item #: PC-GR-4



Your Price:  $5.99 / EACH



The PC Gun Rest is manufactured of durable molded plastic with a magnetic strip on the backside for attaching to a metal cabinet or your vehicle out in the field.   Color shown is Hi-Vis Green.  

 


PC POWDER BAFFLE FOR MEC


PC POWDER BAFFLE FOR MEC


Item #: PC BAFFLE

 




Your Price:  $5.99 / EACH


Powder baffle for MEC reloaders. The PC Powder Baffle designed for reloaders is a one-piece construction made of durable, high-impact plastic. The spring loaded insert prevents powder leakage between baffle and shot/powder bar. Regardless of the powder level in the bottle, the PC Baffle maintains a consistent powder charge by evenly distributing the powder into the bushing.

Dismantler for shells  10 gauge through .410 gauge



Item #: Dismantler

 




Your Price:  $19.99 / EACH  NOW $17.99


This tool helps you recover the expensive components from bad reloads.  Simply insert your shell into the wooden block and rotate the shell with light pressure on the handle.  The handle contains a razor blade which will only score the outside surface of the hull allowing you to recapture your shot, wad, powder, and primer. This tool makes short work of goofs and you only lose the hull.  OSS keeps replacement blades in stock, but I haven't worn out a blade yet.  Always use caution when attempting this, as this is probably a LIVE shell.  It is big enough to handle a 10 gauge hull and I have personally trimmed .410 shells to 2 1/2" length.  You can trim 12 gauge 3 1/2 or 3" to make them 2 3/4" shells with this same tool. 
.410 gauge trimmer for the Dismanter   Your Price: $28.99/EACH  (Includes a dismantler and a .410 trimmer)

 

This is a handy tool adds to your Dismantler (above) in your reloading bench.  With the tool pictured, you can trim your .410 with your Dismantler to a consistent length almost every time. You can trim your 3" hulls down and use them as a 2 1/2" load.  Adjust the silver screw out until your hulls is at the desired length under the razor blade. Now pull off the hull and set the lock nut.  Now put the large head of the trimmer into the dismantler.  Check your line of cutoff to the blade, readjust if needed.  Gently press the blade against the hulls mounted on the trimmer guide.  Spin the hull about 2 cycles (I use counter clockwise) and soon your .410 will be trimmed to the size you set the guide at.  Now you can shoot all of your 3" hulls until the crimps are bad, trim them to 2 1/2" length and if the hull is still solid, reload it again.  Already have a dismantler? The trimmer only is $13.99.
 
Shot and Powder Separator   Your Price: $19.99/EACH  NOW $17.99

This is a handy little tool to put beside your reloader.  If you accidentally mix your powder and shot, this is the perfect invention to separate them.  Just pour the mixed shot and powder into the top of the unit and replace the cap.  Shake a few times. Rubber O rings on the top and bottom prevent spills. Now carefully remove the bottom of the unit and pour your powder back into the correct bottle.  Next, pull the top off again and you will find your shot laying on top of a screen.  You may now pour it back into the shot bottle. 

Colors are Green or Red


      EZ Fill funnel for MEC Bottles    Your Price: $6.60/EACH

Tired of those spill while refilling your bottles?  This funnel fits over any MEC bottle and leaves a 1" tapered lip to make sure you get in all in the bottle.  The inner funnel fits down inside the opening to give you a positive seal.  It fits snug so you have both hands free for you powder or shot.  It has one side flat so it won't get hung up if you are using 2 short bottles.  Once you have one of these, you will wonder how you lived without it.  Your floor will thank you. 

       EZ Pack    Your Price: $11.99/EACH

If you put your reloads into paper boxes, this is the only way to fly.  You place 25 reload shells in the EZ pack, and insert the payload into the cardboard shell box.  Gently pull the metal legs of the EZ pack and it will leave 25 shells neatly placed into your box, ready to close the lid and label.  What a great time saving tool.  Boxes of shells are easier to store than a 5 gallon bucket!

Sizes are: 12, 20, 28, and .410 gauge


        MEC bottle support  Your Price: $24.99/EACH  Now $22.99

If you ever have a bottle break, you will be very glad you installed a bottle support.  Vibration will eventually work the bottles loose and will a tall bottle, that is a lot of shot to clean up!  Progressive reloaders have the vibrations from 6 different task being performed at the same time. as well as moving the completed shells.  It stabilizes the bottles near the top of the short bottles and about halfway up on the tall bottles.  Easy to install.

Specify the Progressive or Single Stage model as the spacing is different. 


      Wheel weight lead ingots    This market varies daily on price.
  Shot makers!  Bullet makers!  We have obtained some ingots already melted down from wheel weights.  This is high antimony lead ready to put in your furnace or shot maker.  Most ingots weigh about 2 - 2.5 lbs  and we have some little muffin size at about 1 lb each.  We also have some wheel weights with the clips still in them if you like melting your own.  Cannot be shipped outside of Omaha as the weight adds quickly to the freight charges.  Call or email for bulk buy.  If you are a salvage yard or a tire store with wheel weights, call or email us as most of the time we pay more than recyclers or can find a buyer if you are near Omaha. 

     Hodgdon Funnel Cap      Your price:  $4.50/EACH

Put this funnel on your power jug and pour directly into your loading bottle.  Lid keeps powder dry when not filling your loader. 

Home   We can accept Money orders or Credit Cards if you have a PayPal account.