Widows

BLACK WIDOW DARTS
The most desired dart among steel-tip dart professionals for over 20 years!
Like its infamous namesake, this fierce competitor will make short work of your adversaries... spinning a web of accuracy and destruction they’ll not forget!

CONSIDER THE WIDOW . . .
From Point To Shaft, the Widow incorporates many innovative concepts.

STEEL-TIP MODELS: #BW1 & #BW2
	CLICK THUMBNAILS TO VIEW LARGER IMAGES

These premium Steel-tip models come equipped with “Spider Leg” shafts, special “Laser” Points, and are available in both FIXED and MOVEABLE point models.

AVAILABLE GRAM WEIGHTS
FIXED POINT	MOVEABLE POINT
20 GRAM	19 GRAM
23 GRAM	22 GRAM
26 GRAM	25 GRAM
28 GRAM	27 GRAM
When ordering: ‘F’ in model number denotes “Fixed Point. ‘M’ in model number denotes “Moveable Point”. (Example: #BWF28 = 28 Gram Fixed Point Model) “Alamo” shafts used on all ’MP’ models.

SOFT-TIP MODELS: #EBW1 & #EBW2

CLICK
THUMBNAILS
TO VIEW LARGER
IMAGES

Now available for Soft-tip dart competitors! These premium Soft-tip models come equipped with “Spider Leg” shafts, 2BA tips and are available in 16, 18 and 20 gram weights.

CONSTRUCTION
The manufacturing process begins with a billet of high-density tungsten. The billet is then center-ground and shaped. The barrel design gives you the best of both worlds... A slightly front-weighted dart for increased accuracy, and a slim barrel for more precise groups. After all tooling is completed, the barrel is re-checked for proper weight.

COATINGS
Darts are normally coated by painting or baking the barrel surface. “Widows” are vapor coated in high heat furnaces that fuse mixtures of titanium/tantalum nitride and titanium carbide to the tungsten barrel. These durable coatings, available in black or gold, provide unsurpassed gripping qualities and a startling appearance.

STYLES
Ringed or Grooved models.

“SPIDER LEG” SHAFTS
Four high tensile strength wires are anchored in an aluminum base and covered with heat shrunk rubber to form a firm hold on the flight.

“LASER POINTS” (Steel-Tip Dart Models)
A rough black oxide coating is applied to the point to increase friction and prevent softly thrown darts from falling out.

The right to download and store or output the materials found on LaserDarts™ Web site is granted for personal use only. Materials may not be reproduced in any form. Any other reproduction in full or in part by any means mechanical or electronic without the expressed written permission of LaserDarts, Inc.™ is strictly prohibited. Certain names, logos, pictures, and/or phrases on these pages constitute trademarks of LaserDarts, Inc.™
All Rights Reserved

GOLD WIDOW DARTS
The most desired dart among steel-tip dart professionals for over 20 years!
Like its infamous namesake, this fierce competitor will make short work of your adversaries... spinning a web of accuracy and destruction they’ll not forget!

CONSIDER THE WIDOW . . .
From Point To Shaft, the Widow incorporates many innovative concepts.

STEEL-TIP MODELS: #GW1 & #GW2
	CLICK THUMBNAILS TO VIEW LARGER IMAGES

These premium Steel-tip models come equipped with “Spider Leg” shafts, special “Laser” Points, and are available in both FIXED and MOVEABLE point models.

AVAILABLE GRAM WEIGHTS
FIXED POINT	MOVEABLE POINT
20 GRAM	19 GRAM
23 GRAM	22 GRAM
26 GRAM	25 GRAM
28 GRAM	27 GRAM
When ordering: ‘F’ in model number denotes “Fixed Point. ‘M’ in model number denotes “Moveable Point”. (Example: #BWF28 = 28 Gram Fixed Point Model) “Alamo” shafts used on all ’MP’ models.

SOFT-TIP MODELS: #EGW1 & #EGW2

CLICK
THUMBNAILS
TO VIEW LARGER
IMAGES

Now available for Soft-tip dart competitors. These premium Soft-tip models come equipped with “Spider Leg” shafts, 2BA tips and are available in 16, 18 and 20 gram weights.

CONSTRUCTION
The manufacturing process begins with a billet of high-density tungsten. The billet is then center-ground and shaped. The barrel design gives you the best of both worlds... A slightly front-weighted dart for increased accuracy, and a slim barrel for more process groups. After all tooling is completed, the barrel is re-checked for proper weight.

STYLES
Ringed or Grooved models.

“SPIDER LEG” SHAFTS
Four high tensile strength wires are anchored in an aluminum base and covered with heat shrunk rubber to form a firm hold on the flight.

“LASER POINTS” (Steel-Tip Dart Models)
A rough black oxide coating is applied to the point to increase friction and prevent softly thrown darts from falling out.

Sign Our Logbook View Our Logbook
Web Counter by TrafficFile.com