| Home | Cleaning | Sighting In | Contact Us | Testimonials | Links | Visit us on MySpace | Site Map |

All Tiger Blocks items are hand made.  Actual color may vary due to characteristics of wood.

	Cutting Block - Northern Curly Maple Comes with 4 rubber feet.  Available with black or brushed-nickel handles. Price:  $16000 to $25000 (sizes from 16" x 10" x 2" to 24" x 15" x 2.5") In Stock: 2.5" x 10" x 22".....$20000
	Cutting Board - Northern Curly Maple Comes with 4 rubber feet.  Available with black or brushed-nickel handles. Price:  $7500 (approx. 22" x 10" x 1")
	Paddle Board - Northern Curly Maple Price:  $5500 (approx. 21" x 8" x 1")
	Cheese Board - Northern Curly Maple Price:  $4500 (approx. 20" x 7" x 1")
	Spatula - Northern Curly Maple Price:  $3000
	Scoop - Northern Curly Maple Price:  $3000
	Spoon (lg) - Northern Curly Maple Price:  $2500
	Spoon (sm) - Northern Curly Maple Price:  $2000
	Roux Spoon - Northern Curly Maple Price:  $1500
	Sugar Maple Smokin' Chips Mildly smoky, sweet flavor.  Good with lamb, pork, goat, poultry, cheese, vegetables and small game birds.  Soak wood chips in water for one hour and place directly on charcoal.  When using gas grill, place chips in metal (or aluminum foil) tray on grilling surface.  3lb bag. Price:  $500

The idea behind the Grand Rifle was to offer a "custom type" gun at an affordable price.  Each rifle is hand made and then carved and engraved.  They are available in either right or left hand.

Early Lancaster Grand - Left hand flint, German silver, Pierced daisy patchbox, .50 caliber tapered Conical barrel 42", fully carved and engraved, pin inlays, engraved eagle in cheekpiece, cherry stock, silver oval thumbpiece inlay

This Month's Special

$2100 + S/H   (Reg. price $2600)

SOLD

TVM's Southern Rifles are just that - rifles that follow a general design of rifles from the South. These differ from a Tennessee Rifle in both appearance and character, and the stock design is very different when compared to a Tennessee Rifle.

Southern, Rifled, 13/16" x 40cal. x 42", R.H. Siler flintlock, Brass, SP Maple.

$1230 + S/H

| Place Order |

TVM's Southern Rifles are just that - rifles that follow a general design of rifles from the South. These differ from a Tennessee Rifle in both appearance and character, and the stock design is very different when compared to a Tennessee Rifle.

Southern - Basic (all parts) 7/8" x 50cal. x 42", Browned steel, R.H., flint, Super premium maple

$1100 + S/H

| Place Order |

Introducing the Pennsylvania Rifle.  We use a York County style stock and furniture pattern. This rifle is a little smaller in the wrist and height of the buttplate.

Iron PA. 7/8" x 50cal. x 42", R.H., flint, Ed Rayle, browned steel, P++ maple stock

$1060 + S/H

| Place Order |

TVM's Southern Rifles are just that - rifles that follow a general design of rifles from the South. These differ from a Tennessee Rifle in both appearance and character, and the stock design is very different when compared to a Tennessee Rifle.

Southern, 7/8" x 50cal. x 42", R.H. Flint, Browned steel, Plain maple, Single trigger, has sideplate and toeplate only with a German silver vent pick inlay.

$940 + S/H

| Place Order |

All guns can be ordered "in-the-white" for $100 less than listed.

KITS available contact us for pricing

Our kits come with the barrel and ramrod channels are completely inlet.  The locks and triggers are inlet about 90%, leaving some of the final fitting to the builder.  Barrels have the breech plugs installed and the dovetails are cut for the sights (except for the octagon to round barrels).  The barrel will be predrilled for stake type tenon (octagon to round being the exception).  The builder must install the tenons, inlet tenons into the stock, and drill the pin holes.  The breech plug tang will be inlet and the touchhole liner/ drum will be drilled and tapped.  Drilled for the center lock bolt.  If you choose to use a forward bolt, you will need to install it.

The butt area of the stock is completely shaped.  The forearm is rounded on the bottom to a basic shape, but left a little heavy on top.  The builder can then use his/her discretion on shaping this area.  The  buttplate, trigger guard,  sideplate, toeplate, nosecap, and thimbles must be installed.  The finishing of the wood and metal is left to the builder's choice.

The Tennessee and Southern are offered as Poor Boy kits.  This means that they do not have a sideplate, nosecap, entry thimble, or toeplate included.  These can be added for the cost of the part.  All of the other kit styles have these parts include.  You can also add other options such as wood upgrades.

ADDED COST OPTIONS

Premium+ Maple: $85

Premium ++ Maple: $110

Super Premium Maple: $150

Walnut: $125

NEW KIT OPTION

We are now offering our kits with ONLY kit shaping and the barrel and ramrod channels inlet.  This will offer savings to those who would like to do more of the work themselves.  Please contact us for pricing

T-Shirts, Hats, Mugs & More...

| Home | Cleaning | Sighting In | Contact Us | Testimonials | Links | Visit us on MySpace | Site Map |

(c) 2008-2009, Teche Valley Muzzleloading, LLC.  All rights reserved.

Questions or comments about website, contact Webmaster